Representational state transfer (REST)

Representational State Transfer (REST) is a style of software architecture for distributed systems such as the World Wide Web. REST has emerged as a predominant Web service design model.

From Wikipedia:

About

The REST architectural style was developed by W3C Technical Architecture Group [5] in parallel with HTTP/1.1, based on the existing design of HTTP/1.0.[6] The World Wide Web represents the largest implementation of a system conforming to the REST architectural style. REST exemplifies how the Web's architecture emerged by characterizing and constraining the macro-interactions of the four components of the Web, namely origin serversgatewaysproxies and clients, without imposing limitations on the individual participants. As such, REST essentially governs the proper behavior of participants.

REST-style architectures consist of clients and servers. Clients initiate requests to servers; servers process requests and return appropriate responses. Requests and responses are built around the transfer of representations of resources. A resource can be essentially any coherent and meaningful concept that may be addressed. Arepresentation of a resource is typically a document that captures the current or intended state of a resource.

The client begins sending requests when it is ready to make the transition to a new state. While one or more requests are outstanding, the client is considered in transition. The representation of each application state contains links that may be used the next time the client chooses to initiate a new state-transition.[7]

REST facilitates the transaction between web servers by allowing loose coupling between different services. REST is less strongly typed than its counterpart, SOAP. The REST language uses nouns and verbs, and has an emphasis on readability. Unlike SOAP, REST does not require XML parsing and does not require a message header to and from a service provider. This ultimately uses less bandwidth. REST error-handling also differs from that used by SOAP.

[edit]Key goals

Key goals of REST include:

REST has been applied to describe the desired web architecture, to help identify existing problems, to compare alternative solutions, and to ensure that protocol extensions would not violate the core constraints that make the Web successful.

Fielding describes REST's effect on scalability thus:

REST's client–server separation of concerns simplifies component implementation, reduces the complexity of connector semantics, improves the effectiveness of performance tuning, and increases the scalability of pure server components. Layered system constraints allow intermediaries—proxies,gateways, and firewalls—to be introduced at various points in the communication without changing the interfaces between components, thus allowing them to assist in communication translation or improve performance via large-scale, shared caching. REST lets intermediate processing by constraining messages be self-descriptive: interaction is stateless between requests, standard methods and media types are used to indicate semantics and exchange information, and responses explicitly indicate cacheability.[8]

[edit]Constraints

The REST architectural style describes the following six constraints applied to the architecture, while leaving the implementation of the individual components free to design:

Client–server
A uniform interface separates clients from servers. This separation of concerns means that, for example, clients are not concerned with data storage, which remains internal to each server, so that the portability of client code is improved. Servers are not concerned with the user interface or user state, so that servers can be simpler and more scalable. Servers and clients may also be replaced and developed independently, as long as the interface between them is not altered.
Stateless
The client–server communication is further constrained by no client context being stored on the server between requests. Each request from any client contains all of the information necessary to service the request, and any session state is held in the client.
Cacheable
As on the World Wide Web, clients can cache responses. Responses must therefore, implicitly or explicitly, define themselves as cacheable, or not, to prevent clients reusing stale or inappropriate data in response to further requests. Well-managed caching partially or completely eliminates some client–server interactions, further improving scalability and performance.
Layered system
A client cannot ordinarily tell whether it is connected directly to the end server, or to an intermediary along the way. Intermediary servers may improve system scalability by enabling load-balancing and by providing shared caches. They may also enforce security policies.
Code on demand (optional)
Servers are able to temporarily extend or customize the functionality of a client by the transfer of executable code. Examples of this may include compiled components such as Java applets and client-side scripts such as JavaScript.
Uniform interface
The uniform interface between clients and servers, discussed below, simplifies and decouples the architecture, which enables each part to evolve independently. The four guiding principles of this interface are detailed below.

The only optional constraint of REST architecture is code on demand. Conforming to the REST constraints is generally referred to as being "RESTful".[9] If a service violates any of the required constraints, it cannot strictly be considered RESTful.

Complying with these constraints, and thus conforming to the REST architectural style enables any kind of distributed hypermedia system to have desirable emergent properties, such as performance, scalability, simplicity, modifiability, visibility, portability, and reliability.

[edit]Concept

Representational State Transfer is intended to evoke an image of how a well-designed Web application behaves: presented with a network of Web pages (a virtual state-machine), the user progresses through an application by selecting links (state transitions), resulting in the next page (representing the next state of the application) being transferred to the user and rendered for his use.[10]

REST was initially described in the context of HTTP, but it is not limited to that protocol. RESTful architectures may be based on other Application Layer protocols if they already provide a rich and uniform vocabulary for applications based on the transfer of meaningful representational state. RESTful applications maximize the use of the existing, well-defined interface and other built-in capabilities provided by the chosen network protocol, and minimize the addition of new application-specific features on top of it.

[edit]Vocabulary re-use vs. its arbitrary extension: HTTP and SOAP

In addition to URIsInternet media types; request and response codes; etc., HTTP has a rich vocabulary of methods:

GET
POST
PUT
DELETE
etc.

REST utilizes these methods and other existing features of the well-known, well-defined HTTP protocol. For example, layered proxy and gateway components perform additional functions on the network, such as HTTP caching and security enforcement.

SOAP RPC over HTTP, on the other hand, encourages each application designer to define new, application specific methods that supplant HTTP methods:

getUsers()
getNewUsersSince(date SinceDate)
savePurchaseOrder(string CustomerID, string PurchaseOrderID)
etc.

This additive, "re-invention of the wheel" vocabulary — defined on the spot and subject to individual judgment or preference — disregards many of HTTP's existing capabilities, such as authentication, caching, and content-type negotiation.[11] The advantage of SOAP over REST comes from this same limitation: Since it does not take advantage of HTTP conventions, SOAP works equally well over raw TCP, named pipes, message queues, etc.

[edit]Guiding principles of the interface

The uniform interface that any REST interface must provide is considered fundamental to the design of any REST service.[12]

Identification of resources
Individual resources are identified in requests, for example using URIs in web-based REST systems. The resources themselves are conceptually separate from the representations that are returned to the client. For example, the server does not send its database, but rather, perhaps, some HTMLXML or JSON that represents some database records expressed, for instance, in Swahili and encoded in UTF-8, depending on the details of the request and the server implementation.
Manipulation of resources through these representations
When a client holds a representation of a resource, including any metadata attached, it has enough information to modify or delete the resource on the server, provided it has permission to do so.
Self-descriptive messages
Each message includes enough information to describe how to process the message. For example, which parser to invoke may be specified by an Internet media type (previously known as a MIME type). Responses also explicitly indicate their cacheability.[1]
Hypermedia as the engine of application state (aka HATEOAS)
Clients make state transitions only through actions that are dynamically identified within hypermedia by the server (e.g., by hyperlinks within hypertext). Except for simple fixed entry points to the application, a client does not assume that any particular action is available for any particular resources beyond those described in representations previously received from the server.

[edit]Central principle

An important concept in REST is the existence of resources (sources of specific information), each of which is referenced with a global identifier (e.g., a URI in HTTP). In order to manipulate these resources, components of the network (user agents and origin servers) communicate via a standardized interface (e.g., HTTP) and exchangerepresentations of these resources (the actual documents conveying the information). For example, a resource that represents a circle (as a logical object) may accept and return a representation that specifies a center point and radius, formatted in SVG, but may also accept and return a representation that specifies any three distinct points along the curve (since this also uniquely identifies a circle) as a comma-separated list.

Any number of connectors (e.g., clientsserverscachestunnels, etc.) can mediate the request, but each does so without "seeing past" its own request (referred to as "layering," another constraint of REST and a common principle in many other parts of information and networking architecture). Thus, an application can interact with a resource by knowing two things: the identifier of the resource and the action required—it does not need to know whether there are caches, proxies, gateways, firewalls, tunnels, or anything else between it and the server actually holding the information. The application does, however, need to understand the format of the information (representation) returned, which is typically an HTMLXML or JSON document of some kind, although it may be an image, plain text, or any other content.

RELATED ARTICLESExplain
Knowledge Federation Webservices Protocol
References
Representational state transfer (REST)
Apache CXF
Open mHealth DSU (Data Storage Unit)
Benefits of a Decoupled CMS Architecture
Building JSON-LD APIs: Best Practices
JSON-LD 1.1
JSON-LD: JSON for Linked Data
Knowledge Federation: Necessity and Required Technologies
QTor: a flexible Publish/Subscribe peer-to-peer organization
Scientific Stewardship in the Open Data and Big Data Era
The Scholix Framework for Interoperability
Transforming User Knowledge into Archival Knowledge
Tutorial 3: Introduction To JSON-LD
Graph of this discussion
Enter the title of your article


Enter a short (max 500 characters) summation of your article
Enter the main body of your article
Lock
+Comments (0)
+Citations (1)
+About
Enter comment

Select article text to quote
welcome text

First name   Last name 

Email

Skip